Operation
17. S et the receiver frequency.
If you specifiedamarkerwiththeTune
with s e tting,
drag the marker to the
required frequency. Fine tune the marker
position with the front-panel knob or
your mouse wh
eel. If y ou selected
Frequency control in the Tune with
setting, press the front-panel FR EQ
button, then
turn the front-panel knob or
use the Freq setting in the toolbar to set
the required frequency.
The receive
r frequency is displayed as
Receiver Freq between the Tune with
and Receiver B W settings.
18. Adjust the Audio Gain setting so you can
hear the de
modulated signal. Note that
the sound level is also affected by the
setting of the Windows v olume control.
66 RSA6100A Series & RS A5100A Series Quick Start User Manual
To Next Page
Loading...
