Adjustments
Adjustments
There are no customer-performable adjustment procedures (calibrations) for the
TBS2000B Series oscilloscopes. Please return the instrument to Tektronix if
adjustment is required. Calibrations can only be performed at a Tektronix service
center and require the use of traceable test equipment (signal sources and
measuring equipment) to verify the performance of the instrument.
To determine if adjustment is required, use the Performance Verification
procedure in the TBS2000B Series Digital Storage Oscilloscopes Specifications
and Performance Verification manual (tektronix part number 077-1148-xx),
available at www.tek.com/downloads. Adjustment is also required after
instrument repair.
TBS2000B Series Service Manual 7
To Next Page
Loading...
Need help?
General
