Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–141
HORizontal:CLOck
TDS 4XXA Only
Enables either the internal or external clocks. The query returns whether the
clock is set to internal or external.
Horizontal
HORizontal:CLOck { INTernal | EXTernal }
HORizontal:CLOck?
CLOck
:
<Space>
?
INTernal
HORizontal
EXTernal
INTernal enables the internal clock mode.
EXTernal enables the external clock mode.
HORIZONTAL:CLOCK INTERNAL
enables the internal clocks.
HORizontal:CLOck:MAXRate
TDS 4XXA Only
Sets the maximum external clock rate. It does not enable the external clock. The
maximum external clock rate affects the decimation rate in Hi–Res mode.
If set to less than or equal to 1000, this command enables roll mode when
external clock is on and roll more is set to auto.
Horizontal
HORizontal:CLOck:MAXRate <NR3>
HORizontal:CLOck:MAXRate?
Group
Syntax
Arguments
Examples
Group
Syntax
To Next Page
Loading...
