Getting Started
Using the Menu Buttons
You can use the menu buttons to perform many functions in the
oscilloscope.
1. Meas. Performs automated measurements of waveforms.
2. Cursor. Activates the
cursors.
3. Save/Recall. Saves and recalls setups and waveforms to memory or
aUSBflash drive.
4. Display. Changes the appearance of waveforms and the display
screen.
5. QuickMenu. Activates QuickMenus such as the built-in Scope
QuickMenu.
6. Utility. Activates the s yst e m utility functions, such as selectin g
a languag e.
TDS3000C Series O scilloscope User Manual 19
To Next Page
Loading...
