Standard Accessories
THDP0200 and TMDP0200 probe standard accessories
Item Description
Extender leads (196-3523-xx)
The female banana connectors on each
end of the leads fit into the probe input
jacks. Use the extender leads to connect
the probe to your circuit, either directly or
through any of the standard accessories
described below.
WARNING.
To avoid electrical shock or
fire, make sure the test leads are in good
condition. The input leads and extender
leads have a jacket wear indicator
which becomes visible if the wire jacket
become excessively worn. If the wear
indicator is visible, do not use the probe.
Contact Tektronix Service for repair or
replacement.
Maximum ratings:
2300 V CAT I
1000 V CAT III
18
To Next Page
Loading...
Need help?
General
