Tektronix TLA7000 Series User Manual

Basic Setups
Basic Steps for U sing a Logic Analyzer
The basic steps for using the logic analyzer are summarized below.
1. Use the Setup window to set up the logic analyzer signals, threshold voltages, clocking, and sampling, and samples per
signal
2. Specify triggering in the Trigger window.
3. Configure a Waveform window.
4. Acquire data.
5. Analyze the data in the Waveform or Listing window.
6 TLA Q uick Start User M anual

Tektronix TLA7000 Series Specifications

General

Brand	Tektronix
Model	TLA7000 Series
Category	Measuring Instruments
Language	English