Chapter 1 About This Guide
This is the installation guide for the WWAN Enabler. It contains information on how to correctly install the device in a
working environment.
1.1 Supported Devices
The information included in this installation guide only applies to the WWAN Enabler.
1.2 Who should read this manual?
This manual should be read by the support personnel who need to configure, maintain and monitor the device.
1.3 When should this manual be read?
Read this guide as soon as you are ready to familiarize yourself with the device and its components.
This manual will help you understand your new device in greater depth.
1.4 What can be found in this manual?
This installation guide contains the following information:
• Description of the features that are available in the WWAN Enabler device.
• Technical specifications.
• Power supply requirements.
• Elements you can connect to the device while it is running.
• Installation and removal procedures for modules and power supplies.
• Description of the device LEDs and connectors.
• Troubleshooting.
1.5 What cannot be found in this manual?
This manual does not contain information regarding the device software or its configuration. For information on how
to configure this device, please see the relevant protocol manuals found on the Teldat website: ht-
tp://www.teldat.com.
1.6 How is the information organized?
Each chapter focuses on a specific part of the hardware and its components. All descriptive, technical specifications
and information on a component can be found in the relevant chapter.
1.7 Technical Support
Teldat S.A. offers a technical support service. Device software can be upgraded on a regular basis for maintenance
purposes and for new features.
Contact information:
Web: http://www.teldat.com
Tel.: +34 918 076 565
1 About This Guide Teldat S.A.
2 WWAN Enabler
To Next Page
Loading...
Need help?
General
