Televes H30FLEX Sky - MDU Measurement Functions: SAT Loggers; SAT1 Logger Operation and Results

H30FLEX Sky handheld DVB meter / Analyzer
14
When the scan is nished, the result of the scan is
shown in the screen:
If one or more channels fail, it is considered that
the dish check fails.
Channel and
Frequency
Use to hange
Long press OK to
go to Channel Info
Bar graph of power
measurement
Color according to
checkmarks
Power and LKM
measurements
of the selected
channel with
pass/fail indicator
Channel and
Frequency
Use to hange
Long press OK to
go to Channel Info
Press OK to conrm
dish check
and go to the next step
(see section 4.4.- SAT1
Logger)
Bar graph of power
measurement
Color according to
checkmarks
Power and LKM
measurements
of the selected
channel with
pass/fail indicator
Result of
the scan
3.3.- SAT1 Logger
This feature is similar to the Dish Check one, but
in this case the device makes a scan in all the
channels of the plan.
Below is a capture of the SAT1 Logger window
with a brief explanation of its features.
When the scan is nished, the result of the scan is
shown in the screen:
Channel
and
Frequency
Use to
change
Press Back to cancel
Bar graph of power
measurement
Color according to
checkmarks
Power and LKM
measurements
of the selected
channel with
pass/fail indicator
Scan
status
Channel and
Frequency
Use to hange
Long press OK to
go to Channel Info
Bar graph of power
measurement
Color according to
checkmarks
Power and LKM
measurements
of the selected
channel with
pass/fail indicator
Channel and
Frequency
Use to hange
Long press OK to
go to Channel Info
Press OK to conrm
dish check
and go to the next step
(see section 4.5.- SAT2
Logger)
Bar graph of power
measurement
Color according to
checkmarks
Power and LKM
measurements
of the selected
channel with
pass/fail indicator
Result of
the scan