Televes H30FLEX Sky - Other Measurement Functions: Echoes and Main Setup; Echoes Analysis Function and Setup

H30FLEX Sky handheld DVB meter / Analyzer
24
5.10. Echoes
(only for administrator users)
It is important to check that no echoes can cause
problems in the reception of DVB-T and DVB-T2
signals.
This feature you allows to visualize the echoes
of the received signal, helping the installer to
minimize them as much as possible for optimal
signal reception.
In addition to the echoes graph, this function
shows the channel power and MER measurements,
as well as the FFT mode, the guard interval, and the
Cell ID.
5.10.1. Main window
Below is a capture of a Echoes window with a brief
explanation of its features:
List of measurements with
pass/fail indicators
and number of echoes
Selected channel
Change using
Echoes graph
5.10.2. Setup
Press to change Echoes options.
- Powering: O, 13V, 18V, 24V.
- Tuning: Channel, Frequency
- Units: us, Km
6. Setup
Select HOME>SETUP to access this menu.
This feature changes the main conguration
settings:
- Terr Plan(*): FCC STD, FCC RETURN, FCC IRC,
FCC HRC, FCC OFFAIR, CCIR, and customers
plans
- Sat Plan(*): F68E INTEL C, 68E INTEL, 42E
TURK, 39E HELLAS, 33E EUTEL, 28E EUTEL, 28E
ASTRA, 26E BADR, 25E EUTEL, 23E ASTRA, 21E
EUTEL, 19E ASTRA, 16E EUTEL, 13E HOTB, 10E
EUTEL C, 10 EUTEL, 9E EUTEL, 7E EUTEL, 4E
ASTRA, 1W THOR5, 1W THOR6, 5W EUTELC,
5W EUTEL, 7W NILE, 30W HISPA, 48W AMZC,