Figure 1-11 Back and left side view of the
Confidea FLEX G4 Wireless Unit
with all possible options
N° Name Description
7 Headphones
connector
Connection of headphones to the Wireless Unit. Mono- and stereo headphones can be
used. On both the left and right sides of the device, there is a headphone connector.
8 Microphone
status LEDs
Indication LEDs that show the status of the microphone: red = active, green = request.
9 USB-C
connection
Connects the unit to a power source, like a laptop.
Recommended cable: 28AWG/1P + 24AWG/2C
Units that are out of range switch off after 5 minutes.
WIRELESS UNITS 27
To Next Page
Loading...
