Televic CONFIDEA FLEX G4 - Battery Charger

BATTERY CHARGER
The battery charger is used to charge the battery packs for the Confidea FLEX G4 Wireless Units.
Controls and Indicators
The battery charger contains:
Figure 1-15 Back of the battery charger
Figure 1-16 Front of the battery charger
1.
LAN: The LAN connection to a PC also serves as the power source of the battery charger.
2.
Charging slot + charging LEDs: The charging slots are where the battery packs are stored to
charge them, and the charging LEDs indicate the charging process of the battery.
3.
Power switch: The battery charger can be switched on or off with the power switch at the back
of the battery charger.
BATTERY CHARGER 33