Charging LEDs
Every charging slot has its own dedicated charging LED which indicates the charging process of the
battery.
Charging LED Battery status
Green fixed Battery is fully charged.
Red fixed Battery is faulty.
Green blinking (low intensity light) Battery is charging but battery level is below 75%.
Green blinking (high intensity light) Battery is charging and battery level is higher than 75%.
Orange blinking (all LEDs) Update process of charger is ongoing.
White fixed Charging is turned on, but no battery is inserted.
Charging the Battery Pack
To charge the battery pack, first switch the charger on and then insert the battery pack into one of the
charging slots. The charging LED will indicate the charging process. When the charging LED is fixed green,
the battery pack has finished charging. You can then remove the battery pack from the charging slot.
The fully charged battery may remain in the battery charger without damaging either
component.
Figure 1-17
Battery pack
being inserted in the
battery charger
BATTERY CHARGER 34
To Next Page
Loading...
