Start-up and Shutdown of Wireless Unit
To start up a Wireless Unit, press the microphone button for a second. The three speaker LEDs and the
two LEDs on the back of the unit turn green.
During the connection process, the touch screen shows the start-up animation and then the connection
animation [1].
The animation changes when the connection with a WAP is established [2].
The device now shows the normal screen [3].
When a device loses its connection, it tries to connect to the same WAP. If that WAPis not available, the
device tries to connect to another WAP. If no connection is established after 5 minutes, the device turns
off automatically to save battery power. Press the microphone button to restart the device.
WIRELESS UNITS 29
To Next Page
Loading...
