14
8. Shielded patch cable, stereo miniplug to stereo miniplug.
NOTE: Available at most electronic stores.
9. Shielded audio cable. Must have male 3-pin XLR connector at one end for connection to the XP-USPG or XP-4PGM
program inputs. Pin out for program inputs is as follows:
Pin 1: common
Pin 2: + program input
Pin 3: - program input
10. Shielded audio cable. Must have male 3-pin XLR connector at one end for connection to the XP-USPG PA output.
Pin out for PA output is as follows:
Pin 1: common
Pin 2: + PA output
Pin 3: - PA output
11. 18” (457 mm) channel output cable, 15-pin Male Dsub to 15-pin Female Dsub. One (1) supplied with each
XP-ES4000.
REFERENCE: For more information, see ES-4000A User Manual [P/N 9350-7551-000] for connection information.
To Next Page
Loading...
