BlueMod+S50 Hardware User Guide
1VV0301505 Rev. 1 Page 38 of 53 2018-03-02
Housing Guidelines
The individual case must be checked to decide whether a specific housing is suitable for
the use of the internal antenna. A plastic housing must at least fulfill the following
requirements:
• Non-conductive material, non-RF-blocking plastics
• No metallic coating
• ABS is suggested
Safety Guidelines
According to SAR regulation EN 62479:2010 the BlueMod+S50/AI is not intended to be
used in close proximity to the human body. Please refer to above-mentioned regulation for
more specific information.
In respect to the safety regulation EN 62368-1:2014 + AC:2015 all conductive parts of the
BlueMod+S50 are to be classified as SELV circuitry. OEM’s implementing the
BlueMod+S50 in their products should follow the isolation rules given in regulation EN
62368-1:2014.
The PCB material of the BlueMod+S50 is classified UL-94V0.
To Next Page
Loading...
