Need help?Do you have a question about the Telit Wireless Solutions LN930-AP and is the answer not in the manual?
General| Brand | Telit Wireless Solutions |
|---|---|
| Model | LN930-AP |
| Category | Storage |
| Language | English |
Describes the signals available at the 75-pin M.2 host interface.
Details the IPC interfaces, focusing on USB 2.0 High-speed and reserved USB SSIC.
Describes the USIM interface and provides design recommendations for SIM card sockets.
Explains the GNSS interface, features, and connections for GPS/GLONASS.
Covers signals for power control, reset, radio disable, LED status, and wake-up.
Explains how the module manages coexistence between radios like WLAN, BT, and GNSS.
Describes the M.2 Carrier Board for system testing, verification, and debugging.
Utility program for downloading binary images into M.2 module flash memory.
Tool for fine-tuning module parameters like audio, NV memory, and RF power.
Details drivers and applications for Windows 7/8, including MBIM and GNSS drivers.
Covers USB sleep states (L1) and remote wake-up functionality.
Specifies 3.3V supply voltage requirements and pin connections for the module.
Provides DC specifications for 3.3V and 1.8V logic signaling.
Lists typical power consumption values for LTE, UMTS, and GSM modes.
Specifies conducted transmit power levels for 2G, 3G, and LTE modes.
Declares compliance with essential requirements of the 1999/5/EC Directive.
Addresses EU requirements for RF exposure limits and separation distances.
Covers R&TTE Directive articles for safety, EMC, and RF exposure.
To Next Page
