Telit Wireless Solutions LN930-AP - Operating Environment

LN930 M.2 Hardware User Guide
1VV0301078 Rev.10 – 2015-11-11
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 61 of 88
7
Operating Environment
Table 24
Operating Environment
Item
Description
Form Factor
Card Type 3042
Operating Temperature The module full operating temperature in compliance with 3GPP
specification shall be
-10 °C to +55 °C – Normal
+55 °C to +70 °C – Extreme
Extreme is the surrounding air temperature of the module inside the
platform when the card is fully operating at worst case condition.
We cannot guarantee the RF performance of the device, since
components might operate out of specification. On the RF side we are
using a mechanism called Progressive Power Reduction to limit the
PA output power at high operating temperature.
Storage Temperature
-40 °C (minus 40) to +70 °C (plus 70) non-operating.
Humidity
<85% humidity, non-condensing