Telephone Line Simulator 4A
Page 42
Note: If there is no spare fuse in the holder, obtain a replacement fuse of the
following type: 5 x 20 mm, 0.25 Ampere, slo blow. See Chapter 9 for recommended
replacement fuses.
4. Return the fuse holder to the opening in the TLS back panel.
5. If the POWER light still does not come on, return the unit for repair as instructed
below.
Return Procedures
If a unit is found to be defective, contact Teltone customer service to obtain a RMA
(Return Material Authorization) number and shipping instructions. When returning
units, provide the following information:
• Unit model number, unit part number, and serial number (obtained from the
Unit ID label on the bottom of the unit).
• Teltone RMA number
• All available fault information
• Complete shipping and billing address
• Repair purchase order
To Next Page
Loading...
