Appendix B: Programming Quick Reference
Telephone Line Simulator 4A
Page 48
Description Command Option Default
Systemwide commands
Reset to Defaults
*00#x#*00#x#
x=0, reset entire unit
x=1, reset Line 1
x=2, reset Line 2
x=3, reset Line 3
x=4, reset Line 4
—
Select Line 1 for
programming
*01#
——
Select Line 2 for
programming
*02#
——
Select Line 3 for
programming
*03#
——
Select Line 4 for
programming
*04#
——
Audio Access Mode
*05#x#y#z
x = 0, monitor mode (y & z must be 0)
x = 1, immediate access
x = 2, dial access
y =0, single user
y =1, multiple user
z = 0, disconnect at on-hook
z = 1, disconnect at end-of-message
dial access,
single user,
on-hook
*05#2#0#0#
Audio Port Access
Number
*06#x#
x = 0-16 digits 411 *06#411#
Ring Type *07#x# x = 0, 20 Hz synthesized sinewave
(default)
x=1, 25 Hz synthesized sinewave
x=2, 30 Hz synthesized sinewave
x=3, 60 Hz synthesized sinewave
x=4, 20 Hz squarewave
x=5, 25 Hz squarewave
x=6, 30 Hz squarewave
x=7, 60 Hz squarewave
x = 0, 20 Hz
synthesized wave
Confirmation and Error
Signals
*08#0#
disable enable *08#1#
*08#1#
enable
Disconnect Timer *09#x# x=10 - 200 (1 to 20 seconds) (2 seconds) *09#20#
Per-line commands
First Phone Number
*11#xx...x#
x = 0 to 16 digits (0 through 9) 101-104
Second Phone Number
*12#xx...x#
x = 0 to 16 digits (0 through 9) 201-204
To Next Page
Loading...
