Teltone TLS-4A - Ring Cadence; Second Phone; Tone Following Disconnect

Reference Manual Appendix B: Programming Quick Reference
40-400-00033, Rev. C
Page 49
Description Command Option Default
Dial tone/Hotline
Number
*13#xx..x.#
x = 0 to 16 digits (0 through 9) 711
Dial Tone Delay
*20#x#
x = 0 to 511 (51.1 seconds) 0.1 sec
Network Response Delay
*21#x#
x = 0 to 511 (51.1 seconds) 0.2 sec
Second Dial Tone Delay
*22#x#
x = 0 to 255 (25.5 seconds) 0.5 sec
Ring Cadence,
Second Phone Number
*23#a#b#c#d#e#
f#
a, c, e = 0 to 30 (3 seconds)
b, d, f = 0 to 63 (6.3 seconds)
1 sec on,
1 sec off,
1 sec on,
3 sec off
Response to Busy
*30#0#
busy tone busy *30#0#
*30#1#
reorder tone
Response to Invalid
Number
*31#x#
x = 0, busy
x = 1, reorder
x = 2, ringback
x = 3, silence
reorder *31#1#
Off-hook (hotline/silent/
normal)
*32#0#
normal normal *32#0#
*32#1#
hotline (ringdown)
*32#2#
silent
Audio Port Permission
*33#0#
disable enable *33#1#
*33#1#
enable
Flash Detect
*34#0#
disable enable *34#1#
*34#1#
enable
Hunt Mode
*35#x#
x = 0, off
x = 1, ring all
x = 2, ring first available
x = 3, ring next
ring all *35#1#
Attenuation
*36#0#
disable disable *36#0#
*36#1#
enable
Forced Disconnect
*38#0#
disable enable *38#1#
*38#1#
enable
Tone Following
Disconnect
*39#x#
x = 0, dial tone
x = 1, busy
x = 2, reorder
x = 3, silence
x = 4, audio port
dial tone *39#0#
Dial Tone Number *60#x# x = 0 - 16 digits 83781 or “TEST1”