Teltonika FMA110 - Immobilizer Digital Output Control (ID=1904); Ibutton List Checking (ID=1905); Immobilizer Ignition off Timeout (ID=1906); Ibutton Detect (ID=1907)

79
8.6.16 Immobilizer digital output control (ID=1904)
This parameter defines digital output control on Immobilizer scenario. 0 – disable, 1 –
DOUT1, 2 – DOUT2.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
2
-
Immobilizer scenario (ID=1903)
U8
8.6.17 iButton list checking (ID=1905)
This parameter enables/disables iButton list chenking. 0 – disable, 1 – enable.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
1
-
Immobilizer scenario (ID=1903)
iButtons list (ID=3500-3999 )
U8
8.6.18 Immobilizer ignition off timeout (ID=1906)
This parameter represents ignition off timeout, after which DOUT is turned on.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
5
65353
30
Immobilizer scenario (ID=1903)
Immobilizer digital output
control (ID=1904)
iButtons list (ID=3500-3999 )
U8
8.6.19 iButton detect (ID=1907)
This parameter enables/disables iButton detect scenario. 0 – disable, 1 – enable.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
1
-
iButton detection digital output
control (ID=1908)
U8
8.6.20 iButton detect digital output control (ID=1908)
This parameter defines digital output control on iButton detect scenario. 0 – disable, 1 –
DOUT1, 2 – DOUT2.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
2
-
iButton detect scenario
(ID=1907)
U8
8.6.21 Trip (ID=1280)
This parameter enables ability to detect START and STOP of the trip.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
1
-
U8