Teltonika FMA110 - Deactivate by (ID=1100); Autogeofence Event Priority (ID=1103); Autogeofence Event Generating (ID=1104); Radius (ID=1105)

83
8.6.28.3 Deactivate by (ID=1100)
Parameter defines Autogeofence deactivation source. Value 1 is dedicated for attached
iButton, value 0 – for Ignition.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
1
-
Enable/Disable (ID=1101)
iButton List (ID=3500-3999 )
U8
8.6.28.4 AutoGeofence event Priority (ID=1103)
Parameter defines AutoGeofence event priority: 0 is low, 1 – high;
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
1
1
Enable/Disable (ID=1101)
AutoGeofence event generating
(ID=1104)
U8
8.6.28.5 AutoGeofence event generating (ID=1104)
Generate event: 0 – no event, 1 – on entering zone; 2 – on exiting zone; 3 – on both;
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
3
2
Enable/Disable (ID=1101)
AutoGeofence event Priority
(ID=1103)
U8
8.6.28.6 Radius (ID=1105)
Parameter represents radius of circle with center device coordinates after activating
AutoGeofence feature.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
1000000
100
Enable/Disable (ID=1101)
Deactivate by (ID=1100)
U32
8.6.29 iButton List (ID=3500-3999 )
Read 5.4.4.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
FFFFFFFF
FFFFFFFF
-
Immobilizer scenario (ID=1903)
iButtons list checking (ID=1905)
U64