Temspec Unit Ventilator IOM 2023-07-05
[2]
INTRODUCTION
About the Unit Ventilator
The Temspec unit ventilator is designed as a means for providing heating, cooling, and ventilation to
the classroom. Our goal is to help create an enhanced learning environment by focusing on the
following points when designing our equipment:
• Cooling, Heating, Humidity And Ventilation Control
• Air Distribution
• Sound Attenuation
By installing the vertical unit ventilator into the classroom, superior control can be obtained for each
room. Because the unit can be ducted, an even distribution of air can be achieved throughout the
room. The unit ventilator is constructed with heavy gauge metal and sound absorbing insulation for
optimal sound attenuation.
By applying sound engineering principles and thorough testing, we ensure the highest quality of
performance of our unit ventilators.
NOMENCLATURE FOR NON-COMPRESSORIZED UNIT VENTILATORS
UD = Upflow Ducted Unit Ventilator
UF = Upflow Freeblow (direct discharge) Unit Ventilator
CD = Horizontally Ducted Unit Ventilator
DF = Downflow Unit Ventilator
ER = Energy Recovery Unit Ventilator
GB = Dual Coil Dehumidifying Air Handling Unit
To Next Page
Loading...