it still does not work, please contact us.
2. Forget the login password and can not enter
the setting page. What can I do?
Press the “RESET” button for 7 seconds to restore the
Router to default settings.
3. The computer connected with the Router
shows IP address conflict. What can I do?
Check if there are other DHCP servers in the LAN. If
there have, disable them.
The default IP address of the Router is 192.168.0.1
and please maker sure the address is not occupied by
other devices. If there are two computers with the
same IP addresses, please modify one.
4. I can not use E-mail and access the Internet.
What can I do?
It happens in ADSL connection and Dynamic IP users.
And you need modify the default MTU value (1460).
Please in the “WAN Setting” modify the MTU value
with the recommended value as 1450 or 1400.
5. How can I configure and access the Internet
via Dynamic IP?
In Setup Wizard of the Web utility interface, select
“Dynamic IP” connection type and click “Save” to
activate it. As some ISPs bind the user computer’s
To Next Page
Loading...
