5.1.2 Wired Broadband Connection (via Wired WAN)
If you are provided the wired broadband by your ISP
to access the Internet, please select “Wired WAN” in
the “WAN Medium” setup page after you enter the
Router’s Web-based interface. It takes effect after
saving and rebooting the device.
Shown as the diagram below:
After saving and rebooting the device, you will enter
the Router’s Web-based interface again. Please click
“Next” as the diagram below:
The screen will show as the diagram below. The
Router supports multiple access ways such as ADSL
PPPOE Dial, Dynamic IP, static IP, etc. In this chapter,
we introduce you three common access way settings.
To Next Page
Loading...
