Please enter the wireless SSID, MAC address, channel,
security mode parameters provided by your Wi-Fi ISP.
If you are not clear, please click” Auto Scan” to finish
the settings. Select and save the settings, and you will
enter the Router’s Web interface again after rebooting
the Router. Then click “next” as the diagram show.
The screen will show as the diagram below. The
Router supports multiple access ways such as ADSL
dial-up, Dynamic IP, and Static IP etc. In this chapter,
we introduce you three common access way settings.
If you are not sure of your ISP access way, you can
enable the auto-detect function to select your access
way.
To Next Page
Loading...
