network smoothly in a complicated wireless area.
Basic Data Rates: For different requirement,
you can select one of the suitable Basic Data
Rates. Here, default value is (1-2-5.5.-11Mbps…).
It is recommended not to modify this value.
Beacon Interval: Set the beacon interval of
wireless radio. Default value is 100. It is
recommended not to modify this value.
Fragment Threshold: The fragmentation
threshold defines the maximum transmission
packet size in bytes. The packet will be
fragmented if the arrival is bigger than the
threshold setting. The default size is 2346 bytes.
It is recommended not to modify this value.
RTS Threshold: RTS stands for “Request to
Send”. This parameter controls what size data
packet the frequency protocol issues to RTS
packet. The default value of the attribute is 2346.
It is recommended not to modify this value in
SOHO environment.
TX Power: Set the output power of wireless
radio. The default value is 100.
WMM Capable: It will enhance the data transfer
performance of multimedia data when they’re
being transferred over wireless network. It is
recommended to enable this option.
APSD Capable: It is used for auto power-saved
service. The default is disabled.
To Next Page
Loading...
