Tenda 3G611R+ - Page 83

tenda@sina.com.cn
 SMTP Server Address: Input the SMTP server
address here. If you are not clear what your
SMTP server’s address is, you can find them from
Help page of the registered e-mail. For example:
smtp.sohu.com, smtp.163.com, etc.
 Send Email Address: Input the sending email
address here.
 User Name: Input the sending e-mail’s user
name.
 Email Password: Input the sending e-mail’s
password.
 Time Triggering Interval: To set sending e-
mail’s time interval. The time ranges from 30 to
1440 minutes.
For example: if you input 30 here, it means the
Router will send an email from “Send Email
Address” to “Receive Email Address” in every 30
minutes. And then the device will clean all
records and start the recording again.
 Entry Triggering Interval: To set sending e-
mail’s entry interval. The entry ranges from 100
to 500.
For example:
If you input 100 here, it means the Router will send
an email from “Send Email Address” to “Receive Email
Address” every 100 entries. And then the device will