Tenda A9 User Manual

26
Web UI Features
1 Attached Device
Click Attached Device and the attached devices’ info pops up. You can check the devices’ IP
addresses and MAC addresses. If there is an unknown device, you can click Add to add it to
Blacklist (Devices in Blacklist cannot access the internet via the extender).
2 Blacklist
On the Status page, click Blacklist, and you can see the devices in Blacklist. Clicking
Remove can remove a device from Blacklist. A removed device can connect to the extender
again.
3 WiFi signal strength of the router
Move the cursor to the WiFi signal icon between the router and extender, and you can see the
WiFi signal strength of the router. Try relocating your extender if the WiFi signal strength is
too low. When the WiFi signal strength is between 40% and 79%, the extending location is
optimum.

Tenda A9 Specifications

General

Type	Network transmitter & receiver
Ethernet LAN data rates	- Mbit/s
Maximum transfer distance	- m
Antenna type	External
Antennas quantity	2
Antenna gain level (max)	3 dBi
Wi-Fi	Yes
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms	WPA-PSK, WPA-TKIP, WPA2-PSK
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Product color	Grey, White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	47.7 mm
Width	56 mm
Height	111 mm