Get to Know Your Extender
Buttons
WPS Button
The LED indicator and WPS button are on the same place. As a button, it is used to establish
a WPS connection with a router or AP.
You can press WPS button on a router or AP first, and within 2 minutes press this button to
establish a WPS connection.
Reset Button
It is used to restore the extender to factory default.
You can use a needle-shaped object to press and hold this button for about 8 seconds until the
LED indicator turns to solid red. When the LED indicator turns to blinking red, it indicates
that the extender has been restored to factory default successfully.
To Next Page
Loading...
