Name: Tenda AP Series
Brand: Tenda
Rating: 4 (1 reviews)

To Next Page

To Previous Page

- 12 -

Radio Band

Select SSID MAC Address

Channel

Bandwidth

Channel Security Mode

Signal

Strength

SSID

IP-COM_123456

Internet Settings

Wireless

Advanced

Tools

Status

Key

Save Cancel

Security Mode WPA2-PSK

Working Mode AP Client+AP

WPA2-PSK/AES20MHz 9

Encryption Algorithm AES

Refresh Disable

Tips:

If the wireless bridge fails, refer to Q3 in FAQ.

Select the wireless network of AP1, and its SSID, Security Mode,

and Encryption Algorithm are filled in automatically, which are

Tenda_123456, WPA2-PSK, and AES in this example. Enter the

Key for the wireless network of AP1, and click Save.

Done. You have bridged AP2 to the network in which AP1 is

deployed. Now you can access the internet through AP2.

If you are using a wired device such as a computer, set its IP

address obtaining mode to DHCP.

If you are using a WiFi enabled device such as a smartphone,

connect to the wireless network of AP2. The default wireless

network name is Tenda_XXXXXX (XXXXXX specifies the

last six digits of the MAC address on the bottom label of AP2).

Questions and Answers:

Need help?

Do you have a question about the Tenda AP Series and is the answer not in the manual?

Tenda AP Series Specifications

General