Super easy IP Camera
38
5.2.4 Network setting
5.2.4. 1 LAN settings
There is two ways to assign IP address, one is DHCP, one is set manually; the default one is
DHCP. If you want to change the IP address of the camera, choose “set IP Manually”, and modify
the information as the below picture:
Just change the last part of IP address, then click “Update” button to save the setting.
The default HTTP port is 80, if you do not modify the port, you can directly enter the camera
IP in the web address field; if you change the port, you need to add "：" and port number benind
the IP address. For example: If you modify the port is 8081, the camera IP address is 192.168.0.10.
You must enter 192.168.0.10:8081 to access camera.
The cameras support RTSP protocol, if select “on” of “RTSP authority verification”, you
need to enter user name and password when invoke video by RTSP protocol.
Note: When you modify the parameters, you need to click Apply to save your settings.
To Next Page
Loading...
