Super easy IP Camera
57
5.3.7. 3 PTZ settings
It will stop cruise automatically after cruising an hour when you select cruise turns as
“always”.
5.3.7.4 Restore factory setting
Click “Restore factory setting” and confirm, the camera will restore to factory setting and
reboot.
5.3.7. 5 Reboot device
You can reboot the device.
5.7.3.6 Upgrade Web UI
There are two kinds of firmware run in the camera, one is system firmware, another one is
Web UI, you can upgrade them respectively.
5.7.3.7 Upgrade system firmware
There are two kinds of firmware run in the camera, one is system firmware, another one is
Web UI, you can upgrade them respectively.
To Next Page
Loading...
