Super easy IP Camera
43
5.2.7. 4 Scheduled time setting
Select the time you want to alarm. The default value is all time. If you want to alarm on
certain time, you can select it on the time table.
The device will trigger the alarm only during the scheduled time period, you can select the
scheduled time according to your request. As shown above, it sets armed time from Mon 8:30 to
9:30, you only need to click the corresponding time block to set them, the time block will become
green when you selected.
Note: Please make sure your system time is correct before you set the alarm time period.
Note: When you modify the parameters, you need to click Apply to save your settings.
To Next Page
Loading...
