Tenda C50 - Status LED Setting

Super easy IP Camera
47
Cruise laps: You can choose any number between 1 to 50, the camera will turn the
corresponding number.
Note: Suggest you cruise laps not to set too big, If you set it is too big, the machine service
life will be shorten .
PTZ speed: There is 3 levels for PTZ, fast, second fast and slow, You can choose any one in
the three, to adjust rotational speed of PTZ.
Center While Self Check: when the Center While Self Check is on, restart the camera, the
camera’s lens location is center automatically.
Close the alarm PTZ movement: When you select On, the camera will not trigger alarm
when PTZ movement. If you select Off, the camera will trigger alarm when PTZ movement.
Users need to click on the “Apply ” after change the Settings, the corresponding Settings will
be saved.
5.2.8.6 Status LED setting
If you feel dazzling lights behind the camera affect your sleeping at night, you can choose to
turn off the Status LED by select .
Note: When you modify the parameters, you need to click Apply to save your settings.