Tenda C50 - Advance Setting (SD Series)

Super easy IP Camera
55
5.3.6 Advance setting
5.3.6.1 Device name setting
The user can name the camera, example for home, office etc.
5.3.6.2 Local recording path
The camera will be automatically create a file folder named “Record files” in root directory
of disk C:\,when the user don’t set “local recording path” and launch recording directly, and then
save recording file to the folder.
5.3.6.3 E-mail setting
When it detects alarming, it can send email to your appointed email box, but you need to set
email service parameters correctly. As shown below, click “Submit” to save these parameters, and
then you can click “Test” to check if the setting is successful.
Note: If fail to finish the test email, pls refer to Addendum 1.