Device Management
- 139 -
The reference topological graph is as follows:
Configuration steps:
Step 1: Enable the remote WEB management.
❶ Remote WEB Management: Click Enable.
❷ WAN: Select an enabled WAN for remote management (In this example, WAN0).
❸ Click OK.
Step 2: Remotely access the router.
Log in to and manage the router by accessing http://202.105.106.55:8088 on the browser of the remote
computer (that has been connected to the Internet and has obtained a Public network IP address).
To Next Page
Loading...
Need help?
General
