Tenda G3 User Manual

Internet Access Setup
- 13 -
Step 2: Set Internet access parameters
Set Internet access information. Select one connection method from Methods 1, 2, and 3 according to actual
situations. Try to surf the Internet after settings are finished.
Click 『Network』 to go to the Internet Setup page.
Tip
 This router provides 2 WAN ports by default. Take WAN0 settings as an example below. WAN1 port settings
are consistent with WAN0 port settings.
 The default connection method of the router WAN0 is ADSL. The default connection method of WAN1 is
Dynamic IP.
 All Internet access setting parameters are provided by the broadband operator. If you have any question,
consult your broadband operator.
 If there is any prompt dialog box appearing in the setting process, take corresponding measures according
to the contents of the prompt dialog box.

Tenda G3 Specifications

General

Brand	Tenda
Model	G3
Category	Network Router
Language	English