Internet Access Setup
- 15 -
Method 2: For users whose computers need only to be connected with a broadband network cable for Internet
access when the router is not used, the connection method is Dynamic IP. Perform settings by referring to the
figure below.
Configuration steps:
❶ Connection Type: Click to select Dynamic IP.
❷ Operator: Select an operator that handles the broadband.
❸ Line Bandwidth: Enter the size of broadband.
❹ Click OK to finish settings.
Wait a moment. When Connection Status is displayed as Connected, you can try to surf the Internet.
To Next Page
Loading...
Need help?
General
