Tenda G3

Device Management
- 35 -
Parameter description in the page:
Parameter
Description
MAC Filter
Enable/Disable the MAC filter function. The default is Disable.
Click this button to add a MAC filter rule.
Click this button to delete a selected rule.
Mode
 White List: Allow a device with this MAC address to access the Internet.
 Black List: Forbid a device with this MAC address from accessing the
Internet.
MAC Address
MAC address of client device.
Time
Time to forbid or allow a corresponding device in the list to access the
Internet.
Status
Current status of a rule, including Enabled and Disabled.
Action
Perform the enable/disable, edit, and delete actions on a rule.
Allow the hosts
excluded from
the list or
disabling the rule
to access the
Internet.
 When this item is enabled, all devices excluded from the list or disabling
the rule in the list can access the Internet.
 When this item is disabled, only the rule in the list is valid and all devices
excluded from the list or disabling the rule in the list cannot access the
Internet.