Device Management
- 36 -
Example of MAC filter
Example: An enterprise uses a G3 enterprise router to establish a network. The staffs are forbidden from
surfing the Internet in office hours, but recruiters are allowed to do so in office hours (8:00 - 18:00). This can
be achieved through the MAC filter function. The MAC address for Internet access is CC:3A:61:71:1B:6E.
Configuration steps:
Step 1: Set a time group (8:00 - 18:00) as follows. For detailed configuration steps, refer to Steps for adding a time
group.
Step 2: Enable the MAC filter function.
Click Enable and OK.
To Next Page
Loading...
Need help?
General
