Tenda G3

Device Management
- 43 -
Parameter
Description
Web Filter
Enable/Disable the web filter function. The default is Disable.
Click this button to add a web filter rule.
Click this button to delete a selected rule.
IP Group
IP group where the rule is valid.
Time Group
Time when the rule is valid, i.e. time to forbid a client corresponding to an IP group in
the rule from using a specified application.
Classification
Application that is forbidden from being used by a device corresponding to an IP
group.
Status
Current status of a rule, including Enabled and Disabled.
Action
Perform the enable/disable, edit, and delete actions on a rule.
Add website contents.