Tenda G3 User Manual

Device Management
- 77 -
Parameter description in the page:
Parameter
Description
ARP Attack
Defense
Enable ARP Attack
Defense
Enable/Disable the ARP attack defense function.
ARP Broadcast Interval
Time interval when the device sends ARP broadcast.
DDOS Defense
ICMP Flood Threshold
If a destination IP address receives ICMP request packets
exceeding a specified quantity within 1s, it is supposed that this
destination IP address is being attacked by ICMP Flood.
UDP Flood Threshold
If a port of a destination IP address receives UDP packets
exceeding a specified quantity within 1s, it is supposed that this
port of this destination IP address is being attacked by UDP
Flood.
SYN Flood Threshold
If a port of a destination IP address receives TCP SYN packets
exceeding a specified quantity within 1s, it is supposed that this
port of this destination IP address is being attacked by SYN
Flood.
IP Attack
Defense
IP Timestamp Option
Whether to check that IP packets from a specified area contain
the Internet Timestamp item.
IP Security Option
Whether to check that IP packets from a specified area contain
the Internet Security item.
IP Stream Option
Whether to check that IP packets from a specified area contain
the Stream ID item.
IP Record Route Option
Whether to check that IP packets from a specified area contain
the Record Route option.
IP Loose Source Route
Option
Whether to check that IP packets from a specified area contain
the Loose Source option.
Illegal IP Option
Whether to check the integrity or correctness of IP packets from
a specified area.
Prohibit Ping
WAN
After this item is enabled, other network devices in the network cannot ping a router WAN
port successfully.

Tenda G3 Specifications

General

Brand	Tenda
Model	G3
Category	Network Router
Language	English