16
Step 6 Click Connect and wait for the router to reboot.
---End
Wait until the progress bar is complete. Log in to the web UI of the router again. Choose Status >
Internet Connection Status to check the connection status.
An example of configuring WISP mode
Application scenario
Tom lives in countryside, and it is not convenient for him to connect the nearest ISP base station
using Ethernet cables. He uses a router F6 to extend wireless signal in his apartment. And the WISP
mode of the router can meet the requirement.
Tom’s ISP provides a hotspot for internet with the information below:
− SSID: ISP_A
− WiFi password: 87654321
− PPPoE user name: Tom
− PPPoE password: Tom123
To Next Page
Loading...
