22
4.6.5 Rebooting PA7
When the parameters you set cannot take effect or PA7 cannot be used normally, please try rebooting it to solve
these problems. Note that when PA7 is rebooting, do not unplug it.
Step 1 Choose System and move to the Reboot part.
Step 2 Click Reboot.
Step 3 Click Reboot on the pop-up window.
--End
4.6.6 Resetting PA7
Hold down the Pair hardware button for 6 seconds to reset PA7, or perform the following steps to reset it:
Step 1 Choose System.
Step 2 Move to the Reset part, and click Reset.
Step 3 Click Reset on the pop-up window.
--End
You are recommended not to reset PA7 unless:
You forget the login password of the web UI of PA7.
PA7 does not work well, and you want to reconfigure it.
You cannot access the internet, and Tenda technical support recommends you to restore factory
default settings.
To Next Page
Loading...
