Tenda PH10 - Page 26

21
4.6.3 LED Control
The following figure shows the available LED indicator control modes. Select one of the modes as required and
click OK.
Parameters Description
Parameter
Description
Always On
It indicates that all the LED indicators of PA7 are in ordinary states.
Always Off
It indicates that all the LED indicators of PA7 are turned off.
Schedule
It indicates that all the LED indicators of PA7 are turned off in specified periods and
return to their ordinary states when the periods expire.
Turn Off During
It allows you to specify a period to turn off the LED indicators of PA7.
Turn Off On
It allows you to specify days to turn off the LED indicators of PA7.
4.6.4 Time Settings
Time-based functions, such as Wi-Fi Schedule and LED Control, require correct time zone settings.
To set the time zone of PA7, perform the following steps:
Step 1 Choose System, and move to the Time Settings part.
Step 2 Select your time zone, and click OK on the bottom of this page to apply the settings.
After the settings are saved, check whether the time displayed in Current Time is correct.