VLAN Management
- 39 -
Delete Port VLAN
As shown in the example of Add Port VLAN, the port 2 and 3 are still in the VLAN 1. So if it
intends to make the port 2 and 3 only communicated with the uplink port G1/SFP1 and
G2/SFP2 and isolated from other non-uplink ports, it is required to delete these two ports
from VLAN 1.
Configuration Steps:
1. Log in the Web administration and go to VLAN Management > Port VLAN page;
2. Select: Check the before Port No. and select the port to be set;
3. VLAN List: In the following input box, enter the VLAN ID to be deleted;
4. Operate: Click -Del to end the setup. The outcome is shown in the page below.
To Next Page
Loading...
