Check the at the top to select all of ports; check the port at the front
of the Port No. to select the corresponding one.
The default VLAN ID is set for the port, thus giving a default VLAN
affiliation to the data package without VLAN Tag.
PVID of each port can be various, but the PVID to be selected must be
the existing one. The value of PVID is 1 by default.
Set ports how to send data and process data received.
Ignore: In case of the data package received without Tag, the data
package to be sent will also has no Tag, and vice versa.
Add Tag: In case of the data package received without Tag, the data
package to be sent will be added PVID of the receiving port; in case of
the data package received with Tag, the data package to be sent will
preserve the Tag.
Remove Tag: In case of the data package received without Tag, the data
package to be sent will also has no Tag; in case of the data package
received with Tag, the data package to be sent will remove the Tag.
To Next Page
Loading...
