Tenda W300A User Manual

300M Wireless-N Access Point
characters with 8-63 ASCII characters.
 AP MAC Address
： Input the MAC address
of remote access point by manual or scan.
Open Scan
： Enable scan to obtain remote
AP MAC address, select one and Click “Save”
to complete this part’s setting. The AP will
reboot automatically, the setting will go into
effect.
Note: In this mode, the two devices should
keep the same channel and encryption
method.
37

Tenda W300A Specifications

General

Brand	Tenda
Model	W300A
Category	Wireless Access Point
Language	English