Wireless N300 Home Router
45
WPS
Wi-Fi Protected Setup makes it easy for home users who know little of
wireless security to establish a home network, as well as to add new devices
to an existing network without entering long passphrases or configuring
complicated settings. Simply enter a PIN code or press the software PBC
button or hardware WPS button (if any) and a secure wireless connection is
established.
Operation Instructions:
PBC: To use WPS-PBC, try two ways below:
1) Press the hardware WPS button on the router for about 1 second and
then enable WPS/PBC on the client device within 2 minutes;
2) Press the hardware WPS button on the router for about 1 second and
then enable WPS/PBC on the client device within 2 minutes;
PIN: On the wireless security page, enable WPS, select PIN and enter the
To Next Page
Loading...
